Yomojo 4G Home Wireless Broadband – APN Setup Guide

 Follow these steps to ensure your Yomojo 4G Home Wireless modem/router is correctly configured to connect to our network. 

 Step 1: Access Your Modem Settings 

1. Open a web browser on a device connected to your modem.

2. Enter the following address into the browser’s address bar: 192.168.8.1

3.  Log in using your modem credentials (these are usually printed on the device or included in the user manual). 

 Step 2: Check the APN Profile 

1. Click on the Settings tab.

2. Navigate to Network Settings > Profiles.

3. Check the existing APN:

• The APN should be: OWHWBB

•  If the APN is correct, click Save if required. 

Step 3: Add a New APN Profile (if needed)

If there is no existing profile with the APN OWHWBB, create a new profile:

1. Click the (+) Add New Profile button.

2. Enter the following details:

   • Profile Name: Yomojo

   • APN: OWHWBB

   • Tick Set as Default Profile

3. Click Save.

Step 4: Configure Network Sharing

1. Navigate to Network Settings > Mobile Network Sharing.

2. Set the following options:

   • Preferred Network Mode: AUTO

   • Network Search Mode: AUTO

3. Click Apply/Save if required.

Step 5: Restart Your Modem

• After saving the changes, restart your modem to ensure the new settings are applied.

• Wait a few minutes for the modem to reconnect to the network.

Step 6: Test Your Connection

• Open a web browser or run a speed test to check that your internet connection is working.

• If the connection fails, double-check the APN spelling (OWHWBB) and network mode settings.

Tips

• Keep your modem firmware up to date for optimal performance.

• Place the modem in a central location, preferably near a window, for better signal reception.

• For Yomojo 5G Home Wireless, the APN settings may differ. Please refer to the 5G-specific support article.